###########################################################################
#                                                                         # 
#           R e p e a t i n g   F i e l d  S p e c i f i c a t i o n s    #
#                                                                         # 
###########################################################################
# This file contains specifications and field groupings for fields in the
# Data Dictionary that are REPEATING Fields.  These fields can be identified
# in the Data Dictionary by the Hxxx or Rxxx in the last four positions of the
# field name. 
#
# Repeating fields are used to specify repeating measurements.
#
# The format for a repeating field name is 4 descriptive characters followed
# by the letter H or R followed by 3 characters for the actual interval 
# the measurement was taken. The field will always be a total of 8 characters.
#
# Example ABCDHxxx.
#
# The following is the format of this file:
#
# Column 1 - 8:   Repeating Field Name
# Column 10 - 17: The Parent Field Name of the Group 
# Column 19 - 80: Comments about the Repeating Field Group.
#
# The lines following the Repeating Field Name Record will contain the required 
# measurements for the particular field.  Multiple 80 characters lines
# can be specified.  A blank line marks the end of each specification.
#
# The Field Name in Column 10-17 designates the the Group in which the field
# belongs.  The First field name in a group is the Parent of the grouping
# and can be used to determine how fields should be grouped.
# The changing of the Parent Field marks the end of a repeating group 
# specification. 
#
# Example:
#
# VIS_Hxxx, DVISHxxx and PVISHxxx expanded for transmission (8 and 16 hours):
#
#           VIS_H008
#           DVISH008
#           PVISH008
#           VIS_H016
#           DVISH016
#           PVISH016
#
# Note:  Repeating field groups must be kept together with in the specified
#        group but the order with in the group does not have to be maintained.
#
###########################################################################
#                Start of Field Grouping Specifications                   #
###########################################################################
#
VE VERSION 19960822
ITEMHxxx ITEMHxxx   OPERATIONAL DATA ITEM 


REMKHxxx ITEMHxxx   OPERATIONAL DATA REMARKS OR DEVIATIONS


TYPEHxxx TYPEHxxx   SHUTDOWN TYPE 


TESTHxxx TYPEHxxx   TEST HOURS (HHH:MM)


STGEHxxx TYPEHxxx   STAGE 


DTIMHxxx TYPEHxxx   DOWNTIME TIME (HHH:MM)


LSTMHxxx TYPEHxxx   LOST TIME (HHH:MM)


DREAHxxx TYPEHxxx   DOWNTIME PROBLEMS/ACTIONS/COMMENTS 


FE__Hxxx FE__Hxxx   IRON HOURS (PPM)
012 108 204 288 NEW

CU__Hxxx FE__Hxxx   COPPER HOURS (PPM)
012 108 204 288 NEW

SI__Hxxx FE__Hxxx   SILICON HOURS (PPM)
012 108 204 288 NEW

VS40Hxxx FE__Hxxx   VISCOSITY @ 40 DEG C HOURS (CST)
012 108 204 288 NEW

FUELHxxx FE__Hxxx   FUEL DILUTION HOURS (% MASS)
012 108 204 288

PENTHxxx FE__Hxxx   PENTANE INSOLUBLES HOURS (% VOLUME)
108 204 288

OILCHxxx OILCHxxx   OIL CONSUMPTION CYCLE XXX (FL. OZ.)
006 012 018 024 030 036 042 048 054 060 066 072

OILLHxxx OILCHxxx   OIL LEVEL CYCLE XXX (FL. OZ.)
006 012 018 024 030 036 042 048 054 060 066 072


******************************************************************************
*                                                                            *
* When transmitting this Data Dictionary, a Header Data Dictionary should    *
* preceed the data.  The latest version of this Header Data Dictionary can   *
* be obtained from the Test Monitoring Center either by ftp (internet) or    *  
* by calling the Test Engineer responsible for this particular test.         *
*                                                                            *
******************************************************************************