###########################################################################
#                                                                         # 
#            D a t a  D i c t i o n a r y  R e p e a t i n g              #
#                F i e l d  S p e c i f i c a t i o n s                   #
#                                                                         # 
###########################################################################
# The following contains specifications and field groupings for fields in the
# Data Dictionary that are REPEATING Fields.  These fields can be identified
# in the Data Dictionary by the Hxxx or Rxxx in the last four positions of the
# field name. 
#
# Repeating fields are used to specify repeating measurements.
#
# The format for a repeating field name is 4 descriptive characters followed
# by the letter H or R followed by 3 characters for the actual interval 
# the measurement was taken. The field will always be a total of 8 characters.
#
# Example ABCDHxxx.
#
# The following is the format of this specification:
#
# Column 1 - 8:   Repeating Field Name
# Column 10 - 17: The Parent Field Name of the Group 
# Column 19 - 80: Comments about the Repeating Field Group.
#
# The lines following the Repeating Field Name Record will contain the required 
# measurements for the particular field.  Multiple 80 characters lines
# can be specified.  A blank line marks the end of each specification.
#
# The Field Name in Column 10-17 designates the the Group in which the field
# belongs.  The First field name in a group is the Parent of the grouping
# and can be used to determine how fields should be grouped.
# The changing of the Parent Field marks the end of a repeating group 
# specification. 
#
# Example:
#
# VIS_Hxxx, DVISHxxx and PVISHxxx expanded for transmission (8 and 16 hours):
#
#           VIS_H008
#           DVISH008
#           PVISH008
#           VIS_H016
#           DVISH016
#           PVISH016
#
# Note:  During electronic transmission, repeating field groups must be kept 
#        together with in the specified group but the order with in the group 
#        does not have to be maintained.
#
###########################################################################
#                Start of Field Grouping Specifications                   #
###########################################################################
#
L38 VERSION 19970129
RBWTHxxx RBWTHxxx   REFERENCE TOP HALF BEARING WEIGHT LOSS (MG)
040

RBWBHxxx RBWTHxxx   REFERENCE BOTTOM HALF BEARING WEIGHT LOSS (MG)
040

RTBWHxxx RBWTHxxx   REFERENCE TOTAL BEARING WEIGHT LOSS (MG)
040

RCBWHxxx RBWTHxxx   REFERENCE CORRECTED TOTAL BEARING WEIGHT LOSS (MG)
040

TST_Hxxx TST_Hxxx   TEST HOURS(HHH)
040

BWLTHxxx BWLTHxxx   BEARING WEIGHT LOSS TOP HALF (MG)
040

BWLBHxxx BWLTHxxx   BEARING WEIGHT LOSS BOTTOM HALF (MG)
040

TBWLHxxx BWLTHxxx   BEARING WEIGHT LOSS TOTAL (MG)
040

CBWLHxxx BWLTHxxx   CORRECTED TOTAL BEARING WEIGHT LOSS (MG)
040

FBWLHxxx BWLTHxxx   FINAL TOTAL BEARING WEIGHT LOSS (MG)
040

OILCHxxx OILCHxxx   OIL CONSUMPTION (lb/h)
010 020 030 AVG MAX NEW

ACIDHxxx ACIDHxxx   ACID NUMBER ASTM-D445
010 020 030 040 NEW

VIS_Hxxx VIS_Hxxx   VISCOSITY AT 40 DEG C AT XXX HOURS (CST)
010 020 030 040 NEW

VIS1Hxxx VIS1Hxxx   VISCOSITY AT 100 DEG C AT XXX HOURS (CST)
010 020 030 040 NEW

PVISHxxx PVISHxxx   % VISCOSITY INCREASE @ 40 DEG C, @ XXX HOURS (CST)
010 020 030 040

PVS1Hxxx PVS1Hxxx   % VISCOSITY INCREASE @ 100 DEG C, @ XXX HOURS (CST)
010 020 030 040

DOWNHxxx DOWNHxxx   DOWNTIME TEST HOURS XXX (HHH:MM)


DDATHxxx DOWNHxxx   DOWNTIME DATE XXX (YYYYMMDD)


DTIMHxxx DOWNHxxx   DOWNTIME TIME XXX (HHH:MM)


DREAHxxx DOWNHxxx   DOWNTIME REMARKS/REASONS XXX


OCOMHxxx OCOMHxxx   OTHER DOWNTIME COMMENT XXX


OUT_Hxxx OUT_Hxxx   OUTLIERS HOURS (HH:MM)


OUTPHxxx OUT_Hxxx   OUTLIERS PARAMETER


OPARHxxx OUT_Hxxx   OUTLIERS PARAMETER RANGE


OREDHxxx OUT_Hxxx   OUTLIERS READING


OTIMHxxx OUT_Hxxx   OUTLIERS TIME OUT (HH:MM)


ODP_Hxxx OUT_Hxxx   OUTLIERS DEVIATION (%)



******************************************************************************
*                                                                            *
* When transmitting this Data Dictionary, a Header Data Dictionary should    *
* preceed the data.  The latest version of this Header Data Dictionary can   *
* be obtained from the Test Monitoring Center either by ftp (internet) or    *  
* by calling the Test Engineer responsible for this particular test.         *
*                                                                            *
******************************************************************************